September Releases - Get em while they're hot!
Added 2020-09-29 05:20:35 +0000 UTC
(Bit of a read sorry, but much coming up.. ) Hiya all,
It's the end of September so all this months releases pictured will be leaving the monthly releases section and spreading out to where they are supposed to be, so new/starter members if you have not downloaded this months models yet please do so (Full access members you can just get them whenever you need)
https://www.hex3dpatreon.com
November is also fast approaching which marks our 4th Patreon Anniversary!!! wow.. time flies!
While I have some great stuff lined up - there is one special model that will be only for full access members as a reward for hanging around. I won't give too much away but we know the Avengers statue/diorama is coming and that is planned for our anniversary release as it's a pretty massive model.
This Avengers Diorama will NOT be available to starter access/new members.
But if you are reading this post, guess what? because even if you only signed up this month,/september... by November you will be on full access :) so you're all winners!
There still will be of course a tonne of normal releases for November for all members but as I said I would like to reward those who stick around with something they've been patiently waiting on for a long time (among other things!) So as I said if you were thinking about signing up, signing up later in this month will do you a great deal more than signing up in early October!!
Lot's coming!!!
Thank you to everyone who has supported us over the years, literally literally could not do it with out you.
G.
Comments
No, there is no paying up front as per the FAQ. If nothing in the starter pack or the last two months worth of stuff doesn't interest you then its very likely nothing in the archive will either, so maybe just cancel.
Geoffro / Hex3D
2021-08-17 00:40:59 +0000 UTCCan I just pay you for the three months outright? There is nothing in the recent packs that interest me so I am just going to cancel.. I've already did the whole run around between both sites.
Jeremy Scott
2021-08-16 23:45:49 +0000 UTCI'd love to see all the tiki stuff turned into tiki mugs!!!
Matt Allen
2021-07-04 20:17:00 +0000 UTCyes, you need to join the member site for downloads
Geoffro / Hex3D
2021-05-01 06:49:37 +0000 UTCIs this the same as hex3d I'm already a member
Blain MOrlan
2021-04-30 23:46:54 +0000 UTCwait i see it in the started pack!!!! MAN I LOVE THESE!!!!! YOU SIR ARE A LEGEND!!
Joel Navarro
2021-01-08 00:03:12 +0000 UTCNope sorry,
Geoffro / Hex3D
2021-01-07 17:58:29 +0000 UTCIs there any way i can get the c3p0 one? Im a new member and i joind once i saw this masterpiece!!
Joel Navarro
2021-01-07 15:40:44 +0000 UTCfixed this by the way
Geoffro / Hex3D
2020-11-21 06:01:08 +0000 UTCalready been done!
Geoffro / Hex3D
2020-11-21 05:59:54 +0000 UTCI've also hit my 3 months subscription. Can I have archive access?
Keegan Duck
2020-11-20 07:40:35 +0000 UTCThanks man, i love your prints, i can't wait to see what all i can do, your baby yoda ones are by far my favorite!
Adam Eash
2020-11-16 20:29:32 +0000 UTCill sort it out
Geoffro / Hex3D
2020-11-16 17:14:58 +0000 UTChey i've hit my 3 months, when do i get access to the catalogue?
Adam Eash
2020-11-16 15:16:51 +0000 UTCgee how did that happen? :p
Geoffro / Hex3D
2020-11-12 01:02:42 +0000 UTCsorry i must of missed it lol
Phillip Williams
2020-11-12 00:50:01 +0000 UTCThe scheduled post for some reason didnt happen as i explained in the facebook group
Geoffro / Hex3D
2020-11-11 23:32:57 +0000 UTCWhat happened to October as its now November.
Phillip Williams
2020-11-11 22:30:22 +0000 UTCok je l'avez déjà lue c'été juste pour la confirmation merci google translate// ok I have already read it, it was just for confirmation thank you
R2.D3D
2020-10-25 05:37:06 +0000 UTCTout est couvert dans ce sujet: https://www.hex3dpatreon.com/viewtopic.php?f=25&t=334
Geoffro / Hex3D
2020-10-25 05:30:50 +0000 UTCbonjour donc il faut attendre 3 mois avant d'avoir accé a tout vos stl c'est bien celas cordialement google translate // hello so you have to wait 3 months before having access to all your stl that's fine cordially
R2.D3D
2020-10-25 05:27:45 +0000 UTCAlex, the reason for the depot was done so members who are on old tiers that don’t exist anymore still have the same access to the files as they had before. I can’t physically change the tier you are on and so tonnes of people wouldn’t miss out when I went from having 3 tiers to just one simple one.l - so as a work around to things we can’t change on patreon I give access to the files externally to patreon so I can ensure everyone’s getting what they are supposed to. I’ll get your account there sorted out.
Geoffro / Hex3D
2020-10-24 20:34:57 +0000 UTCmy current tier shows as the expired tier. I think it still takes the payment? I'm rather confused. I only have access to the monthly stuff even though I have been a member a long time, not sure how long but I'm guessing 10 months.
Alex Varley
2020-10-24 12:17:07 +0000 UTCThis is what I'd love to see.
Steve Mcqueen
2020-10-21 19:06:28 +0000 UTCThe tier 2 and 3 access were ceased and everything rolled into one simple tier. The reason for the short wait for access to all previous posts sort of replaced the 5/10/15 dollar tiers. So yeah it might look confusing as older posts refer to these tiers but they do not exist anymore and on full access people get everything that was ever in tier1/2/3 anyway
Geoffro / Hex3D
2020-10-21 06:09:16 +0000 UTCJason, There is a 3-month newbie wait you are able to get the current months and stater pack downloads. After the 3 months, you will be able to access all of his creations
William Dick
2020-10-19 19:25:08 +0000 UTCI am still confused about the Tier system. I have made two payments so far and have access to the starter package and blog posts. Been printing the heck out of that stuff! So is there a 2nd Tier and 3rd Tier, or is it just the starter pack and then after the 3rd payment full access? Thanks!
Jason Christman
2020-10-19 19:17:42 +0000 UTCHi Geoffro, I love your work. Any chance you could do something from Jim hensen’s labyrinth or the original dark crystal?
Candice Miller
2020-10-19 00:40:02 +0000 UTCOk
Darryl Cross
2020-10-17 18:56:07 +0000 UTCYour account was activated about an hour ago but you haven't logged in yet, check your spam mail perhaps
Geoffro / Hex3D
2020-10-17 18:44:19 +0000 UTCYou do awesome work.
Darryl Cross
2020-10-17 18:43:44 +0000 UTCThanks for your help.
Darryl Cross
2020-10-17 18:43:38 +0000 UTCI’m sorry. I was Unaware about the time difference.
Darryl Cross
2020-10-17 18:43:31 +0000 UTCI am in AU Time Darryl, it does state its a manual activation, and you signed up at around 2am my time. It's now 5:40am and all accounts have been activated.
Geoffro / Hex3D
2020-10-17 18:42:20 +0000 UTCIt clearly says in the aforementioned instructions that HE has to approve each registration at the member's depot, and it will take some time. Patience, young grasshopper.
Xavier Dremée
2020-10-17 18:40:35 +0000 UTCA saw a skull you made on a 3-s printing Facebook group and I thought it was awesome.. so I found and joined you on Patreon.
Darryl Cross
2020-10-17 15:35:06 +0000 UTCDoes anybody have this same issue?
Darryl Cross
2020-10-17 15:34:09 +0000 UTCI clicked and registered but haven’t been approved yet.
Darryl Cross
2020-10-17 15:33:38 +0000 UTCI followed all of the instructions on his front page about clicking the link to join the members depot..
Darryl Cross
2020-10-17 15:33:20 +0000 UTCI paid money to join and support this artist , but I haven’t been able to download anything.
Darryl Cross
2020-10-17 15:31:54 +0000 UTCIs this Patreon still active?
Darryl Cross
2020-10-17 15:31:11 +0000 UTCJust joined today. Seen a post about the baby yoda mash up and checked it out. You are the first person I have ever use patreon for. I hope Im not to late for them, I plan on staying either way. Amaazing work
Tina
2020-10-15 04:00:18 +0000 UTCbonjour et le baby yoda chuky n'ai plus dispo merci
R2.D3D
2020-10-08 06:35:34 +0000 UTCje Vien de m'inscrire donc pas le droit pour le mois de septembre je pense
R2.D3D
2020-10-07 20:12:35 +0000 UTCis it possible to still get the baby yoda hellraiser?
Henry Araujo III
2020-10-07 14:12:54 +0000 UTCcant wait to see the models.. Im amazed at the few I can see
Henry Araujo III
2020-10-07 03:26:07 +0000 UTCSo glad I just found your patreon. The baby yoda hellraiser looks awesome
Geratt Schmidt
2020-10-05 03:22:01 +0000 UTCIt’s a manual process.
Geoffro / Hex3D
2020-10-05 03:13:26 +0000 UTCThe specified username is currently inactive. If you have problems activating your account, please contact a board administrator.
Jason Crouse
2020-10-05 03:12:25 +0000 UTCTha k you so much Geoff have fun with your parents I will be grabbing up these prints.
brian hobbs
2020-10-05 00:03:13 +0000 UTCYou signed up at 5am my time sorry, had to activate it. Also these were september releases so you normally wouldn't be able to get them on the say 5th of October, but you're lucky. I am visiting my elderly parents today after not being able to see them for about 6 months so instead of me spending today moving septembers releases into the archive, i'll be doing that - so.. you have some hours still to grab them
Geoffro / Hex3D
2020-10-05 00:02:01 +0000 UTCStill have to wait for my registration to be approved so I can access these prints
brian hobbs
2020-10-04 23:15:53 +0000 UTCclick the link above.
Dan McDonald
2020-10-02 17:46:55 +0000 UTCI have just signed up does that mean i have missed sept baby yodas really wanted childs play one
Sam
2020-10-02 11:08:31 +0000 UTCI also couldn't find the General Grievous
Joseph VonDohlen
2020-10-01 10:08:10 +0000 UTCso where is the link to grievous then? I couldn't see it.
Joe Thibodeau
2020-10-01 04:25:28 +0000 UTCGeoff, Do you provide a zipped link to the month's files to download... similar to the starter pack? I only grab a few throughout the month. but then end up re-downloading them ALL just to make sure I didn't miss any... would be nice to have one link to DL at the end of each month.
mark johnson
2020-10-01 01:45:42 +0000 UTCnah ur still ok ;)
Geoffro / Hex3D
2020-10-01 01:24:08 +0000 UTCThey have not been removed yet, and i will give another 24 hours notice to everyone before they are moved
Geoffro / Hex3D
2020-10-01 01:23:54 +0000 UTCI just joined. Is it too late to get access to the September files?
Paul Grimes
2020-10-01 00:10:23 +0000 UTCHoping my member depot account gets activated b4 i miss out on these prints. Really want pin head baby yoda
Robert West
2020-09-30 21:39:14 +0000 UTCSo question for the Child Cenobite with no pins, is there a file for the pins to print separately? I just re-downloaded the archive and don't see anything resembling that in there.
sp3cialk
2020-09-30 17:33:07 +0000 UTCAny chance we can get a non-cut version of Starkiller Helmet? Basically one cut only where need be to be able to print. But not for a smaller printer.
Charles Anderson
2020-09-30 02:42:48 +0000 UTCyou need to sign up to the member depot in the link above if ur not a member yet there
Geoffro / Hex3D
2020-09-30 01:28:30 +0000 UTCyou need to sign up to the member depot in the link above if ur not a member yet there
Geoffro / Hex3D
2020-09-30 01:28:22 +0000 UTCCan you send me a link for the pin head, chucky and freddy child I cant see them any where on the page.
Jordan Ford
2020-09-30 00:17:18 +0000 UTChow do I download starter pack
Mariano
2020-09-30 00:10:59 +0000 UTCfinally managed to sign up, looks like a good time to be doing it as well.think will be a while before I can do justice to your awesome designs
chris b
2020-09-29 19:24:53 +0000 UTCGlad i joined in August.
SirBlyndFury
2020-09-29 12:41:39 +0000 UTCSo glad I joined in time!!!
Bob Modrow
2020-09-29 09:03:25 +0000 UTCFor me...the best investment at Patreon 👍 I hope there are coming more models for the "horroctober" ;-)
MrOllium
2020-09-29 06:15:27 +0000 UTC
