Hi All,
Welcome to another month, i'll be rolling several models out very early this month and a few left over from last month so get your printers ready.
If you have not registered on the Archive, please follow the link below and ensure you use the same email as you use on patreon to register an account so it matches here. This is a separate site so you will need an account for there also as well as here - the older models and updates and fixes (and tutorials) are...
Model from the request album, this was a fun one to do,
Supplied are 3 versions:
1) Fully uncut with horns and all
2) Full uncut with separate horns
3) Cut version in 6 parts and separate horns.
Enjoy :)
Quick sculpt based on a cool piece of art, couldn't think of a more appropriate name :)
Easy print, separate stand also included, enjoy :)
This is an ongoing project and all files will be added to this post. Once complete it will be moved to the archive for members who are on full access, or have been members for 3 months or more.
I've added the larger parts of the Torso so you can get printing, i'll be uploading the remaining steps throughout the next 2 days.
(from newest to oldest)
*ADDED Bicep and Forearm Assemblies
*ADDED Hand Assemblies
*ADDED Torso Parts and Assembly Steps 21-31
*ADDED Fix for Sho...
Just a quick meme inspired model, seemed to get enough votes for an upload so here he is.
Since the size of the chest burster is so small the amrs and head are a separate piece as printing this on one piece would chew all the fingers, and there is also a larger 'book end' version included.
The supports are pretty minimal also on this one if generated at about 60'
Enjoy!
Just a random model to keep some printers busy, been working on getting heaps lined up (not so much random stuff but just requested stuff) so get your printers warmed up we have some stuff coming!
I'll also be adding alot of addons to the Member Depot, so even if you think you've downloaded it all, you're wrong! it's not just an archive, its where all the additional parts, fixes, updates etc are placed and often some new models that get thrown in as a bonus to those utilising the new ...
Just a quick fun sculpt, of course inspired by the Undercover boss skit, I thought we could use a laugh :)
He didn't have a base originally but there is a couple hollowy bits around the start of the print in the backpack that probably couldnt hurt having a base.
Single piece print will need some supports of course, scale down for SLA.
Enjoy :)
Didn't realize this would be as popular so no point delaying, here is a full cut and uncut version. I did not go nuts with the strap fittings on the forearms and knees, they are just there to make things easier and if you don't want them just clip them off and sand it down. Approx Dimensions and assembly manuals included
You will need both packs below if you are doing the uncut pieces, the uncut pack only has in it what was required and that is the pieces that we...
I've supplied a couple of extra pieces than usual, the pipes are a tough print so there is some pre-plated presupported full sets to make things a little easier, just use a low infill setting and the supports wont take much at all. There is also an optional cut P1 which is not in the manual above (just an additonal 2 part split)
Chin support added in case you dont want to wall mount it as it would fall forward otherwise. Overall should not be too difficult to print!
enjoy :)
...
Full size at resting is with the eye at C3P0 head height, around 5'7" (can be extended or lowered). Before you ask where is V3 small all in one, its coming, thats the easy one guys.. this one needed alot of pre-planning)
I am uploading this in steps so I don't miss anything, so im uploading Steps 1-2 now and currently checking 3-4 and will upload and so on, but it will be all up in the next 24 hours - this is a large print project make no mistakes, it will require a fair bit of filamen...
Not a difficult print, a couple of cavities inside the head I want to fix still but at this size will print fine (or bigger)
Mask will need some supports as the cuts are not dead flat and follow the curved cuts in the helmet.
.. Still lots more to upload ! promised my wife i wouldn't work this sunday night so i better get off the pc for the night and ill catch you all in the morning!
This is a bit of a tester, we'll make some decent wearables and 1:1 depending on how well this one goes.
Its a pretty easy print, the head itself will need some supports but not a massive amount and the dreadlocks themselves wont need any.
Print 1 x Dreadlock A and 2 x of everything else (just mirrored on each side) looking forward to seeing the results!
Updated:
DO NOT PRINT THE WINDSHIELD FROM THE MAIN (LARGE) 7Z FILE, IT IS AN INCORRECT SCALE - PLEASE DOWNLOAD THE CORRECT SCALE PART 7
*Added 4 figure options and a new bust (derived from figure of course)
*Added correct Scale Part 7 Batmobile Windshield below
Assembly manual included in the 7Zip . There is a couple parts in this pack that are slightly over ender build plate size, will add additonal cuts tomorrow with some other models.
<...
Since this is one piece I have just scaled it for an Ender build plate, it is not exported to Scale and will leave the actual size of the print up to you. There is a large brain pattern cavity if you want to put LED's in and also so it looks like there is something in there when you do it in clear resin or filament even without leds.
Its prepped flat on the build plate but some supports underneath would not hurt, infill up to you. The internal cavity has some overhangs when it ge...
" usa tu correo electrónico patreon !!"
" Verwenden Sie Ihre Patreon-E-Mail!"
" usa la tua e-mail patreon !!
" utilisez votre e-mail patreon !!"
HOW DO YOU SIGN UP TO THE MEMBER SITE?
You need to visit https://www.hex3dpatreon.com
1. Create your account.
2. USE THE SAME email address as you use for Patreon when you sign...
Hiya,
Edit - P14 was bugged, have uploaded just a plain flat topper for the rear rube
Have added the 1:6 scale (no hinge) (based off of the standard size of a 1:1 Gonk being approx 114cm high (45") high, therefore a 1:4 = 28.5cm high, 1:6 = 19.0cm high - so the 1:6 scale stands (not including antenna) at 190mm tall when assembled. It is in a simpler print and the base has been flattened more for a better print (total of 7 parts)
This shouldn'...
Edit - very sorry for the file messup, just a tired mistake at 4am... have fixed and reuploaded
Since posting images of this i've been sent several other types of these dioramas and will make some more versions as time allows, but will upload this one at least for now. The Arnie insert measures 15.3cm high or approx 6" / 1:12 scale figure height.
Printing notes:
Infill % is up to you but Supports are required for the hinges.
Part 3 /4 the Top piping may b...
Another year, another May the 4th (this is our 4th year too!) something for a fun print and paint, Darth Yoddle!
I've included a cut, uncut and also a split body option (I still suggest printing Part 1 as 1 piece but if you have issues you can use the split A/B
#2 in the set (and the biggest at 12 inches high!) who will be next? its up to you guys... (there is 31 collectible toys in total in the game.. (I think...)
Make no mistake, this is not a tiny print so the pieces are cut as minimally as possible, ie, head, torso, arms and legs - has been test printed A.ok.
enjoy :)
As requested, Set in 5 parts (pop stick optional) also a balloon included for a pennywise modification .
Very small amount of supports required on the hand, but we're talking small
enjoy :)
2020-04-23 11:10:03 +0000 UTC View Post
UPDATE: FIXED LARGE UNCUT FOREARM P2/3/4
(if you are printing the 4 piece cut version of the arm, this does not matter for you)
Not too difficult a build, just a few parts to knock out. Assembly manual included.
Large parts like the base have optional cuts (marked A,B,C,D both on the file and on the model itself )
LED's/Lights are really up to you. I've set the small 12 x holes around the edge for 5mm leds, feel free to drill them out larg...
From the depths of the member requests, shouldn't be too hard a print, will need some supports tho.
2020-04-18 08:39:22 +0000 UTC View Post
*No supports required for the hands or the card
Have included 2 versions, one for the printed card and another with a cutout for a real card (much thinner cutout) should hold a few cards and of course included the printed card.
I figured this would be a little heavy toward one side so ive put a small cutout in the base so you can put some weight in there afterward.
Batman hand will be up next as one, happy to keep doing these ones if people want them, they are much easier...
*UPDATE - Part 40 eye shell 2 part split added (REQUIRED UPDATE) Otherwise you won't be fitting that eye ball inside.
*UPDATE - Part 13 FIXED added to fix pipes were falling out
*UPDATE - Part 16 was incorrect (was a duplicate of 15...) it has been added below.
*There has been a few changes from the render above, mainly the Eyelids and eyelid hinge. The stripes were taken off the middle iris also.
Full instructions PDF are incl...
2020-04-12 15:04:57 +0000 UTC View Post
This is just a couple of filler while I get all the other more complex models ready, these are at least easy quick prints, no supports,
Enjoy :)
FIRST massive thank you to those that participated / are participating. I made this one maybe a little too complex for the time frame, totally my bad - I know a lot of people are close to finishing and since this is judged on the best output/paint/everything I want to give everyone the chance to not have to rush . and the upcoming May print challenge will be EASY PEASY so can be started late.
Some of what are in the prize packs for the challenge were posted on the FB group page...
Let's all have a smile, we need it. :)
Full and uncut supplied.
After this upload I will be moving the last few months models (prior to April) to the new server so if you haven't grabbed them yet, i'd get grabbin!
(just to clarify the moving the files thing... they are not being deleted! it's just too chaotic and from now on the system will be very very simple...
As mentioned previously, this is a very basic system, ie. this is the only basic thought pro...
*edit added a hollow rocket launcher to double as pen holder
Supports required, not a massive amount as the Rocket Launcher is a separate print, should be relatively easy print otherwise,
Enjoy!
This is not a small print... (of course rescale if you wish!) but as it stands, the Mask measures 420+mm high when orientated with nose upward, so this is a big print but once its done the base, it needs virtually zero supports. Eyes are cut out but included
2020-03-22 02:46:18 +0000 UTC View Post
This bust suffered from it's own design and that was the giant horns always limiting the build size and the supports were mental... well no more! I wanted to give this some love as it does come out a very clean print and also one of my favorite character makeup/costume fx's ever in a movie (I even got to make one for school theater production some 26 years ago back in the day.. so yeah a long time now..)
This is a newer version, gems added to the shoulders, 2 more print opt...