Patron Series 3 - Constructing a Dial Indicator (Overview)
Added 2021-06-25 18:48:08 +0000 UTCG'day folks,
Do please enjoy this overview of the next Patron Series on constructing a dial indicator. As for the most recent TGT video, I have put together a selection of hi-res pics of the series prototype as wallpapers, so be sure to check them out too: https://www.patreon.com/file?h=52894753&i=8310743
Next up in the video pipeline is the Antikythera project with both a full episode and a Fragments video in the works.
Cheers,
Chris.
Direct links to the video -
Vimeo: https://vimeo.com/567259094/74434ec2d4
Youtube: https://youtu.be/apJ9hgPS2M4
-------------- Video Notes: ---------------
(Amazon Affiliate links to items used in this video)
Cameras:
Panasonic GH5 - https://amzn.to/2rEzhh2
Panasonic X920 - https://amzn.to/2wzxxdT
Books:
"Watchmaking" by Daniels: https://amzn.to/2V8ljSe
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"The Art Of Engraving" (James B Meek): https://amzn.to/2qa2McL
"Casting Practice - The Ten Rules of Castings": http://amzn.to/2HF3VfL
"Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw
"Drills, Taps and Dies", Tubal Cain: https://amzn.to/3wUFNA7
Soldering and Brazing (Workshop Practice, No 9): https://amzn.to/2MV7zsY
WO Davis – “Gears For Small Mechanisms”: https://amzn.to/2Yj2Ben
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: https://amzn.to/2EArNRU
Starrett S828 Wiggler Center Finder With 3 Attachments - https://amzn.to/3hoAsK1
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Blazer GB2001 Self-Igniting Butane Micro-Torch: https://amzn.to/3f5Gzlh
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: https://amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: https://amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: https://amzn.to/2G7ylv6
Hegner Scroll Saw: https://amzn.to/2IhteVW
Proxxon 37172 Micro Band Saw MBS/E: https://amzn.to/2ONORR1
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: https://amzn.to/2PkyoTV
Gravermach AT: https://amzn.to/2mubLE5
Monarch Handpiece: https://amzn.to/2MOILjA
Jewellers Bench Block - https://amzn.to/3clHQD2
Accusize Industrial Tools 81 Pcs Steel Gauge Block Set, Grade B: https://amzn.to/3h0KAct
Consumables:
Tix Solder: http://amzn.to/2G4lUiE
Tix Flux 1/2oz: http://amzn.to/2G85OEZ
Blue Matador Abrasive Paper: https://amzn.to/2IAFiBT
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Salamander A-6 SUPER Clay Graphite Morgan Melting Crucible: http://amzn.to/2pkVAak
Super Pike Saw Blades Size 4/0 pkg of 144: https://amzn.to/2uI0QdT
Bergeon Professional Cleaning Rodico: https://amzn.to/2NwcM6y
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: https://amzn.to/2EC7zHk
Jewellers Tools Pithwood: https://amzn.to/2IQrW9e
Thermo-Lock: https://amzn.to/2nV8ttW
Renaissance Microcrystalline Wax Polish: https://amzn.to/2uic7l2
WR Smith Rub-N-Brite Polish: https://wrsmithclocks.com/product/rub-n-brite/
Comments
Thanks for the offer Fred, much appreciated, terrific to have you watching - Cheers :)
Clickspring
2023-01-07 23:23:34 +0000 UTCHi, great work, I am an avid follower! I was very happy to see a set of our gage blocks shown in your video. Let me know if you need any other precision instruments, I can certainly help out.
FREDERICK V FOWLER
2023-01-07 17:32:04 +0000 UTCI love books too, its pretty much my main source of learning. I like your idea above for the theme, and I also have a rough idea of what I'd like in there too. It might also be worthwhile to see what other people want from a modern home shop book too. If I'm going to do it, I may as well shoot for a target - anyhoo, back to work for me!
Clickspring
2021-12-01 01:08:18 +0000 UTCI dont hesitate to buy a book that is quality and informative. That said my wife is a librarian and I have never been shy to buy a book or two to learn. This book could be a 21st Century Homeshop companion for many people. I learn more when I can 1) compartmentalize a task 2) study and 3) execute. If a step is too big I can't do 1..2 & 3. People spend lots on their shops, a book like this can help us go from hobbyists to craftsmen who produce great work every day (form, function and accuracy). This book can cross over from clock makers (repair guys) and machinists. That is a fairly large chunk of guys looking for a book that is passionate about what we dream of doing.
Paul Devey
2021-12-01 00:52:14 +0000 UTCHa ha! Thank you :) Yes I agree with your point above on the re-use etc, and it might let me go a little broader and deeper on some of the things that tend to get glossed over because of the short video format too. It would be a lot of work to complete, but this is certainly shaping up to be an excellent project to underpin a book. I've priced hardback, full color etc, and it would need to retail at something like $50 USD to cover the costs of production. Not sure how many people would be willing to spend that amount on a book, so probably a poll of patrons at some point would be the best way to gauge if the interest is there.
Clickspring
2021-12-01 00:45:26 +0000 UTCI would buy this book and read it like my Daniels books. Title: How to Build a Deco Starrett Dial Indicator in the Home SHop!
Paul Devey
2021-12-01 00:32:05 +0000 UTCI would expect that a book could reuse script, pictures/screen captures and various workflows. Maybe someone could do the "integration" lifting and then you do the editing (reverse of how a book is often done). It would save you time but ultimately as the editor you are in control of conveying the correct messages. A tech editor helps out too.
Paul Devey
2021-12-01 00:30:44 +0000 UTCYes certainly Paul, that's my thinking too. Its turned into a sort of 'foundational' project for setting up the home shop for small scale work, since it touches on virtually everything in terms of tools and also requires a fair amount of design consideration too. I'm also toying with the idea of maybe doing a hard copy book to cover it too; I will decide on that later in the build. In any event, I'm on the home stretch of Ep 1 as I write, it should be out in a day or so - Cheers :)
Clickspring
2021-12-01 00:26:51 +0000 UTCWhen I first saw this video months ago I thought "great, when can I see it". After watching it a few times and thinking about it I see there is a lot of opportunities to educate, entertain as well as describe possibly different options ex. Dial Option 1) Rose Engine turned 2) Acid/Electrolysis etched 3) Bauhouse simplicity dial. I am very excited.
Paul Devey
2021-12-01 00:19:54 +0000 UTCI thought the same thing...So I started looking into what it would take to build one. Possibly overly ambitious, but there are some very clever homebrew designs out there that make it seem like an attractive extended project. I even found one that can convert to a straight line engine by mounting a rack and pinion between the spindle nose and workholding. Genius! Doesn't even need extra pattern bars; it can just use the same rosettes. Should be a lot of fun if and when I get my shop capabilities up to the point of taking that on.
Naphilnux
2021-11-12 10:33:22 +0000 UTCThere is no Mountain high enough for you and I love it. Great work 👍
M.janikkkkkk
2021-09-15 16:30:26 +0000 UTCThe work is particularly time consuming David; the videos come out when that work has been completed. Thank you for your support thus far :)
Clickspring
2021-08-27 20:00:53 +0000 UTC1 video every 3 months?
David Martinez Zaragoza
2021-08-27 12:05:00 +0000 UTCWaiting with anticipation of another excellent series
Grant McKinna
2021-08-15 10:49:43 +0000 UTCHmmm.. I'm telling ya... motion activated web cam in in your shop. This place would go ballistic! ;-)
Dilapidus
2021-08-06 03:28:53 +0000 UTCMaybe not close, but certainly closer. I had an idea for this next Fragments video that I think will be really cool, but it is taking me a bit longer to get it all over the line - Cheers :)
Clickspring
2021-08-05 02:43:37 +0000 UTCWe are starting to froth over here, man. A disturbance in the force tells me we are very close to a new video.
Dilapidus
2021-08-05 02:04:11 +0000 UTCYou hafta be a master to take on a project like that. He was just getting his chops in the internationational archeology world. Which he did!
Kas Steel
2021-08-04 17:19:43 +0000 UTCHey Chris! Awesome project you´re making here! I feel like we´re going to see the Sherline fairly often :) Do you know when the next episode is released?
Dan
2021-08-02 17:05:20 +0000 UTCYou learned a lot from the Antikythera project. You are now a master!
Kevin Reardon
2021-07-15 02:30:38 +0000 UTCIf I build this project I would electro-etch the dial
Paul Devey
2021-07-08 14:21:27 +0000 UTCAs usual an incredible combination of technical excellence, attention to detail and artistic expression.
Kent Villard
2021-07-08 10:18:10 +0000 UTCSo beautiful
Jonathan Numer
2021-07-03 15:42:18 +0000 UTCIncredible. Just getting started machining at home; been at it for about a year, after following you for a long time. Seriously looking forward to this project, as a dial indicator still seems like something completely out of reach. “You could never even begin to make that, leave it up to Starrett”
Ken Johnson
2021-07-02 05:34:52 +0000 UTCThis is wonderful, thanks for inspiring us with what is possible in the home workshop. Now let's figure out some connection with forging . . .
John S Dilsaver
2021-06-29 21:28:34 +0000 UTCThanks for the information!
Andy Palatka
2021-06-29 20:41:31 +0000 UTCYes more on the way in due course - Cheers :)
Clickspring
2021-06-29 19:12:07 +0000 UTCThank you mate! (Each indicator type best suits certain roles, but there is a bit of overlap that tends to come down to personal choice. I generally use a test indicator a lot on the mill to locate a part feature, and the plunge type indicator on the lathe for travel, dialing in a part in a 4 jaw etc)
Clickspring
2021-06-29 19:11:25 +0000 UTCCheers mate :)
Clickspring
2021-06-29 19:10:15 +0000 UTCAwesome mate, so pleased :)
Clickspring
2021-06-29 19:09:39 +0000 UTCOhhh, very cool! Love the aesthetic! Just curious, will there be further episodes on the antikythera mechanism? I might have missed an announcement on that at some point, but it's still incomplete, right?
Kevin McLeod
2021-06-29 03:38:20 +0000 UTCThis is amazing and I can't wait. I was wondering what are the advantages of a spindle type gauge versus a lever type? I've only ever used lever types but no gauge has ever looked this beautiful
Andy Palatka
2021-06-28 22:40:13 +0000 UTCThis is fucken sick, I can't wait!
Aidan Jeffes
2021-06-28 20:43:31 +0000 UTCChris - this looks awesome. I've never got into clock building, but have loved watching your videos. I mostly make steam engines, but seeing your videos has inspired me to spend a lot more time in the shop and add to my tool collection. I've even been thinking about building a clock ... but this! This is awesome! We ALL need more dial indicators! Looking forward to the project and I'm going to try to follow along and build one.
Gerald Quakenbush
2021-06-28 13:27:57 +0000 UTCThank you all :)
Clickspring
2021-06-27 21:05:34 +0000 UTCHa ha! Thank you mate!
Clickspring
2021-06-27 21:03:46 +0000 UTCThank you mate :)
Clickspring
2021-06-27 21:03:14 +0000 UTCCheers Geoffrey!
Clickspring
2021-06-27 21:03:04 +0000 UTCTerrific to hear that mate :)
Clickspring
2021-06-27 21:02:43 +0000 UTCCheers Noah :)
Clickspring
2021-06-27 21:02:26 +0000 UTCHa ha! Thank you mate!
Clickspring
2021-06-27 21:02:15 +0000 UTCYes!
Clickspring
2021-06-27 21:02:02 +0000 UTCCheers Thomas :)
Clickspring
2021-06-27 21:01:19 +0000 UTCCheers Roel!
Clickspring
2021-06-27 21:00:50 +0000 UTCThank you Jeremy!
Clickspring
2021-06-27 21:00:39 +0000 UTCCheers mate :)
Clickspring
2021-06-27 21:00:28 +0000 UTCHa ha! The TARDIS qualities of the shop have served well up until now, but this machine lives in the spare room inside :)
Clickspring
2021-06-27 21:00:12 +0000 UTCCheers mate :)
Clickspring
2021-06-27 20:51:54 +0000 UTCThank you Marcelo!
Clickspring
2021-06-27 20:51:05 +0000 UTCSo pleased you like both!
Clickspring
2021-06-27 20:50:49 +0000 UTCYes!
Clickspring
2021-06-27 20:50:09 +0000 UTCThank you mate :)
Clickspring
2021-06-27 20:50:02 +0000 UTCHa ha! Glad you liked it :)
Clickspring
2021-06-27 20:49:46 +0000 UTCCheers Graeme :)
Clickspring
2021-06-27 20:49:14 +0000 UTCIt certainly helped me get more comfortable with smaller parts. Would love to have you build along Frank :)
Clickspring
2021-06-27 20:48:56 +0000 UTCThank you mate :)
Clickspring
2021-06-27 20:47:25 +0000 UTCHa ha! Thank you mate :)
Clickspring
2021-06-27 20:46:57 +0000 UTCCheers Jay :)
Clickspring
2021-06-27 20:46:32 +0000 UTCSo pleased to hear that mate!
Clickspring
2021-06-27 20:46:12 +0000 UTCThank you!
Clickspring
2021-06-27 20:46:01 +0000 UTCThanks Gabriel :)
Clickspring
2021-06-27 20:45:48 +0000 UTCCheers Jim!
Clickspring
2021-06-27 20:45:33 +0000 UTCThank you Mike!
Clickspring
2021-06-27 20:45:18 +0000 UTCThank you mate :)
Clickspring
2021-06-27 20:45:03 +0000 UTC:)
Clickspring
2021-06-27 20:44:51 +0000 UTCCheers Brian :)
Clickspring
2021-06-27 20:44:38 +0000 UTCThank you mate :)
Clickspring
2021-06-27 20:44:26 +0000 UTCCheers Leo :)
Clickspring
2021-06-27 20:44:15 +0000 UTCHa ha! Cheers mate :)
Clickspring
2021-06-27 20:43:53 +0000 UTCSeemed perfectly appropriate to me. Plenty of overly dramatic music to be found in YouTube videos. This wasn't. I think the music perfectly complemented the craftsmanship of both the work being shown and the superb video work, as usual.
Jon Miller
2021-06-27 20:42:13 +0000 UTCThanks Gary :)
Clickspring
2021-06-27 20:42:13 +0000 UTCCheers Matt :)
Clickspring
2021-06-27 20:41:56 +0000 UTCThe only thing I don't love about this is that it will now be that much harder for me to acquire a rose engine lathe! Really looking forward to the series, and maybe even winning the Chrysler building of dial indicators!!
Jon Miller
2021-06-27 20:39:26 +0000 UTCWhat an awesome idea. Looks super complicated to me, so I will be fascinated to follow its construction. Cheers Chris for such a brilliant idea.
veritanuda
2021-06-27 14:20:32 +0000 UTCVery excited. I've recently been consuming everything to do do with engine turning / guilloche on the internet. I think it's a fascinating process and I can't wait to see the Clickspring version of it!
Geoffrey Croker
2021-06-27 09:14:49 +0000 UTCI'm really looking forward to this. And I assume Adam Savage will love this too.
Magnus Köhler
2021-06-26 21:50:06 +0000 UTCVery cool! Love the art-deco case.
Noah Orr
2021-06-26 20:56:16 +0000 UTCStunning Chris and a full Antikythera episode to boot! Love the deco wings and ridge-back radius case...dial off the chart! Buckling up, folding tray fully upright, electronics set for interstellar travel mode...
PJ
2021-06-26 16:52:44 +0000 UTCGood point. I was so stunned by the guillochis in that place that I did not even think the obvious: Where... em ... what ... em ... how the hell did Chris do that again!
Kai Bröking
2021-06-26 12:29:41 +0000 UTCThis must be the only dial indicator on the planet with a guillochis dial face. You are one for going over the top...
Kai Bröking
2021-06-26 12:24:24 +0000 UTCWhat an amazing showcase of what you can do in a home workshop. I would never have thought this sort of precision was possible but excited to see how you prove that wrong :)
Thomas Richards
2021-06-26 08:41:28 +0000 UTCLove the design, looking forward to see more of this project!
Roel Jordans
2021-06-26 08:21:13 +0000 UTCExcellent content as always, looking forward to more. That art deco design is aces!
Jeremy
2021-06-26 06:28:21 +0000 UTCNice to see the new patreon series properly set in motion. Thank you for all you do. Also can't wait for the next video and seeing you tackling the final stretch of the Antikythera Mechanism.
Justus Dehegovit
2021-06-26 05:32:27 +0000 UTCYou're welcome to your opinion, but I disagree.
Bork Bork Foxxo
2021-06-26 03:28:15 +0000 UTCNow hang on just a minute there, Chris. I have never questioned all of your wizardry so far, but I just can't see how you can fit a Guilloché engine into that tiny workshop space, no matter how efficiently it is organised. It wouldn't even get through the door. I remind you that it says quite clearly in our Patreon contract (section 17, clause 3) that any discoveries in trans-dimensional machine shop techniques must be shared with your patrons. Cheers Sean
Sean Kirby
2021-06-26 03:01:03 +0000 UTCFlawless video and narration. Music track was distracting.
maydreamer
2021-06-26 02:35:52 +0000 UTCIf I am able I will be following. Working on a small 1'x1' cnc. Need to come up with something for a micro lath tho. Have a ac motor and 4 smaller dc motor think power tool and hot wheels. We will see and great job if that's Is already made.
Christopher Wolford
2021-06-26 02:24:13 +0000 UTCAmazing! Looking forward to the series! Cheers from Brazil!
Marcelo Gonzalez
2021-06-26 02:11:09 +0000 UTCWhat a project! What a title card!
Daniel Bohrer
2021-06-25 22:58:41 +0000 UTCTime to dust off my Eureka relieving device and its attachments.
Gerrit Visser
2021-06-25 22:36:55 +0000 UTCIf you’d held off publishing this till next week it’d have felt like Christmas in July 😊😊
Iain Deas
2021-06-25 22:09:28 +0000 UTCLove the small homage to "flight of the navigator" at the end ;-)
Glen Beestone
2021-06-25 22:02:57 +0000 UTCI so cannot wait for the rest of this series Chris! TFS, GB :)
Graeme Brumfitt
2021-06-25 21:58:58 +0000 UTCThis is incredible. I have never tried to build anything like this but I am extremely tempted to attempt the build - I know it would help my skills to improve. Specifically turning small parts and hand finishing components.
Frank Kreidemaker
2021-06-25 21:32:42 +0000 UTCI think if I had that dial indicator, I'd spend too much time just staring at it in admiration, instead of using it. Also, really looking forward to the next Antikythera episode.
Julian Gall
2021-06-25 21:12:51 +0000 UTCCouldn't help myself. Was gonna wait til the end of the video to like it, but as soon as I heard that voice I had to hit it haha
Dane Kinnear
2021-06-25 21:09:13 +0000 UTCLove the blued elements and the art deco lines. Looking forward to the series. Always inspirational on so many levels.
Jay Holmes
2021-06-25 21:08:09 +0000 UTCOh! I am so looking forward to this Chris!
DaveC
2021-06-25 20:39:18 +0000 UTCStunning!
Stuart
2021-06-25 20:38:40 +0000 UTCThat is gorgeous. Looking forward to the series.
Gabe
2021-06-25 20:33:18 +0000 UTCAs usual, just marvelous. My game is leather crafting but it doesn't matter, it is all about design, beauty, form and function. Thanks for making the internet a better place Chris!
Jim
2021-06-25 20:08:08 +0000 UTCWhen you posted the engine turning video I assumed you were simply giving a makeover to an existing indicator. I don't know why I'd set such a low bar - I should've known better, haha. Excellent work!
Mike Michelizzi
2021-06-25 20:05:51 +0000 UTCNicely artistic while keeping form and function. I look forward to the series; as always.
KD Smith
2021-06-25 20:04:56 +0000 UTCwooooo new video!
Trevor
2021-06-25 20:03:46 +0000 UTCThat’s the best looking dial indicator I’ve ever seen. Can’t wait to see it getting created.
Brian Boccia
2021-06-25 19:59:01 +0000 UTCIt's just so beautiful... I sat with my jaw dropped for so long that my mouth dried out. simply astonishing Chris.
Matthew Wilson
2021-06-25 19:54:18 +0000 UTCLove it! As a lover of all things metrological, you have complete attention with this! And 100% agreed with what you said about the headaches of work-holding. As I go deeper into CNC machining, I’m discovering that just holding the workpiece is a big part of the challenge. Looking forward to this build!
LeoMakes
2021-06-25 19:19:50 +0000 UTCwas just on amazon looking at dial indicators... they don't look like that. 8-)
bruce linde
2021-06-25 19:17:57 +0000 UTCSuch a beautiful design. Great job as always. Really looking forward to seeing everything that goes into this build series. Cheers
Gary Levario
2021-06-25 19:16:17 +0000 UTCMost kind of you Fred, thank you :)
Clickspring
2021-06-25 19:14:42 +0000 UTCWill go through some cool options re metric etc in the build - Cheers :)
Clickspring
2021-06-25 19:14:02 +0000 UTCThank you mate!
Clickspring
2021-06-25 19:13:25 +0000 UTC:)
Clickspring
2021-06-25 19:13:07 +0000 UTCThere is always the option of a makeover... :)
Clickspring
2021-06-25 19:13:01 +0000 UTCWhere art and engineering fuse. Stunning. Looking forward to the build 👍 🇬🇧
Matt Waite
2021-06-25 19:12:33 +0000 UTCThanks Sam!
Clickspring
2021-06-25 19:12:18 +0000 UTCCheers Damian :)
Clickspring
2021-06-25 19:12:03 +0000 UTCCheers mate :)
Clickspring
2021-06-25 19:11:47 +0000 UTCYes!
Clickspring
2021-06-25 19:11:40 +0000 UTCIf Breguet had made dial indicators, I think they would have looked like this. Gorgeous! Can’t wait to see the build process.
Fred Patton
2021-06-25 19:08:37 +0000 UTCObviously it is finished now, so too late. But it would have been interesting to make a dual-reading dial indicator, metric and imperial. My (Holbrook) lathe had some handle dials that did this, each turn was really 1/8" on an 8tpi leadscrew, but there were two scales, one 0-125 thou, and one 0-3mm. The rather lovely thing was that they were geared together, so that the mm scale moved just enough more than a full turn for every rev so that there was no cumulative error.
Andy Pugh
2021-06-25 19:08:06 +0000 UTCOMG... that looks absolutely beautiful! I'd never have thought a dial indicator could be considered a piece of art!
Chris Waldrip
2021-06-25 19:06:43 +0000 UTCWoo!
Zach Wolf
2021-06-25 19:05:16 +0000 UTCTerrific mate, so pleased :)
Clickspring
2021-06-25 19:03:46 +0000 UTCI had not previously considered how unattractive my dial indicators are. But now, I will never look at them in the same way again.
Andy Pugh
2021-06-25 19:02:38 +0000 UTCStanding by for the best looking dial indicator ever built. Great idea Chris!
sam littlefield
2021-06-25 19:01:02 +0000 UTCGreat to see this, Chris! Can't wait for it!
Damian Sutter
2021-06-25 19:00:31 +0000 UTCBeautiful. Thanks as always.
Dilapidus
2021-06-25 19:00:30 +0000 UTCThank you mate, its going to be a terrific build series :)
Clickspring
2021-06-25 19:00:01 +0000 UTCA new thing!
Leo G.
2021-06-25 18:59:50 +0000 UTCOooh. Can't wait! https://giphy.com/gifs/DM9n9fNry8tq0
Bob Koutsky
2021-06-25 18:59:31 +0000 UTCCheers Nigel :)
Clickspring
2021-06-25 18:59:25 +0000 UTCThank you David :)
Clickspring
2021-06-25 18:59:05 +0000 UTCThat is an absolute masterpiece :)
Oddmar Dam
2021-06-25 18:56:44 +0000 UTCAbsolutely gorgeous. Truly inspiring work. Looking forward to watching!
Nigel
2021-06-25 18:55:15 +0000 UTCWhat a fantastic looking piece!!! Love the design you've chosen, can't wait for the new series to begin proper 👍🏻👍🏻😂
David Sullivan
2021-06-25 18:54:56 +0000 UTCLoving the engine turning so much, I will do a couple of dial inset versions to justify lingering on the topic :)
Clickspring
2021-06-25 18:54:51 +0000 UTCThank you mate :)
Clickspring
2021-06-25 18:53:40 +0000 UTCYes! Cheers mate :)
Clickspring
2021-06-25 18:53:22 +0000 UTCWhat a work of art. I'm especially excited to see the engine turning process on the dial face. I can't wait.
Michael Carter
2021-06-25 18:52:44 +0000 UTCG’day Chris. Fantastic work as always, and so great to hear that soothing voice again! Hope you’re well!
Spadge Fox
2021-06-25 18:50:24 +0000 UTCSo you've been busy I take it :)
Matthieu Germain
2021-06-25 18:49:50 +0000 UTC
